NEC NEAX 2000 IPS Installation Manual page 256

STEP2: Set the switch located inside the console according to the type of headset/handset connected.
Refer to next page.
Switch Setting on the SN708/709/712/741 ATTCON
• Slide the directory out of the way.
Then insert a flat screw driver's blade into the notched opening and apply light upward pressure until
the access panel is clear of the front lip. At the same time apply pressure (toward you) at the rear of
the pedestal to move the access panel.
Page 241
DIRECTORY
– 240 –
SN708/709/712/741 ATTCON (DLC)
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
ACCESS PANEL
Continued on next page
NWA-008841-001 Rev.5.0
90ch2002.fm