Using The Micro Adjust Function; Adjusting The Tear Off Position - Epson LQ-690II User Manual

Using the Micro Adjust Function

The Micro Adjust function allows you to move the paper forward or backward in 0.141 mm (1/180
inch) increments so that you can make precise adjustments to the top-of-form and tear off
positions.

Adjusting the tear off position

If your paper perforation is not aligned with the tear off edge, you can use the Micro Adjust
function to move the perforation to the tear off position.
Follow these steps to adjust the tear off position:
Note:
Your tear off position setting remains in effect until you change it, even if you turn off the printer.
1. Make sure the paper is at the current tear off position.
2. Hold down the Pause button for about three seconds. The Pause light begins flashing and the
printer enters the Micro Adjust mode.
3. Press the d button to feed paper forward, or press the u button to feed paper backward, until
the paper perforation is aligned with the tear off edge of the printer cover.
Note:
The printer has a minimum and a maximum tear off position. If you try to adjust the tear off
position beyond these limits, the printer beeps and stops moving the paper.
4. Tear off the printed pages.
LQ-690II/LQ-690IIN User's Guide
Paper Handling 47