Paper Jams; Paper Feeds At A Slant; Several Sheets Of Paper Are Fed At A Time; Paper Out Error Occurs - Epson WorkForce WF-2870 Series User Manual

Table of Contents

Advertisement

Solving Problems
Related Information
"Environmental Specifications" on page 230
&
"Paper Handling Precautions" on page 54
&
"Available Paper and Capacities" on page 52
&
"List of Paper Type" on page 58
&

Paper Jams

❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
Related Information
"Removing Jammed Paper" on page 189
&
"Loading Paper in the Rear Paper Feed" on page 55
&

Paper Feeds at a Slant

Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
"Loading Paper in the Rear Paper Feed" on page 55
&

Several Sheets of Paper are Fed at a Time

❏ Load one sheet of paper at a time.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.

Paper Out Error Occurs

When a paper out error occurs although paper is loaded in the rear paper feed, reload paper in the center of the
rear paper feed.

Paper is Ejected During Printing

When you load letterhead paper (paper on which information such as the sender's name or corporation name are
pre-printed in the header), select Letterhead as the paper type setting.

Original Does Not Feed in the ADF

❏ Use originals supported by the ADF.
>
Paper Does Not Feed Correctly
>
Original Does Not Feed in the ADF
195

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workforce wf-2870dwfC11cg31403

Table of Contents