Brocade Communications Systems WFT-2D User Manual page 242

6
Dashboard customization
Top Port Encode Error Out monitor
The Top Port Encode Error Out monitor displays the top ports with encoding errors outside of
frames in a table.
The Top Port Encode Error Out monitor includes the following data:
•
•
•
•
•
•
•
•
Viewing additional details for the Top Port Encode Error Out monitor
1. Click the View Details icon.
2. Click the close (X) button.
190
Widget title — The name of the widget.
View Details icon — Click to launch the Detailed View page.
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
Top value — The highest value in the table.
Port — The port affected by this monitor. Click to launch the Port Page (refer to
view" on page 225). When you launch the Port page, the detailed view closes.
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
summary view" on page 225). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
•
Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
"Port summary
Brocade Network Advisor SAN User Manual
53-1003154-01
"Port