Configuring E-Mail Notification - Brocade Communications Systems WFT-2D User Manual

Configuring e-mail notification

To configure and enable e-mail notification, complete the following steps.
1. Select Server > User Profile.
2. Select the E-mail Notification - Enable check box to enable e-mail notification.
3. Click Filter to set up basic event filter.
4. Enter your e-mail, text message, or page address in the E-mail Address field.
5. Click OK on the User Profile dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
The User Profile dialog box displays.
For step-by-step instructions about setting up basic event filters, refer to
event filtering" on page 1258.
Enter more than one e-mail address, separating each with a semi-colon. To send a text
message or page via e-mail, use the following format number@carrier.com, where number is
your phone number and carrier.com is the SMS server. For example, 3035551212@txt.att.net
(text message) or 3035551212@page.att.net (page).
NOTE
Check with your carrier for the exact e-mail address.
5
User profiles
"Setting up basic
163