Clearing Previous Versions Of The Remote Client; Logging Into The Web Client - Brocade Communications Systems WFT-2D User Manual

7.
8. Click OK on the Login Banner dialog box.

Clearing previous versions of the remote client

The remote client link in the Start menu does not automatically upgrade when you upgrade the
Management application. You must clear the previous version from the Java cache.
To clear the Java cache, complete the following steps.
1. Select Start > Settings > Control Panel > Java.
2. Click View on the General tab.
3. Right-click the application and select Delete.
4. Click Close on the Java Cache Viewer dialog box.
5. Click OK on the Java Control Panel dialog box.

Logging into the web client

You must log into a Management application server to monitor the network. To launch a web client,
complete the following steps.
1. Open a web browser and enter the IP address or host name of the Management application
Brocade Network Advisor SAN User Manual
53-1003154-01
Click Login.
The Management application displays.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.
The Java Control Panel dialog box displays.
The Java Cache Viewer dialog box displays.
To create a remote client link in the Start menu, refer to
page 4.
server in the Address bar.
If the web server port number does not use the default (443 if is SSL Enabled; otherwise, the
default is 80), you must enter the web server port number in addition to the IP address. For
example, IP_Address:Port_Number.
The web client login page displays with the server name and IP address in the upper left. You
can launch the Java client from any page of the web client by clicking Desktop Client. You can
download the client bundle (64-bit OS only), JRE, or MIB files by clicking JRE and MIB files.
Management server and client
"Launching a remote client"
1
on
5