5
Roles
2. Click Add under the Roles table.
3. Enter a name of the role in the Name field.
4. (Optional) Enter a short description for the role in the Description field.
5. Add or remove privileges as needed.
6. Click OK to save the new role and close the Add Role dialog box.
7.
Editing a role
To make changes to an existing role, complete the following steps.
1. Select Server > Users.
2. Select the role you want to edit in the Roles table and click Edit.
3. Complete
150
The Add Role dialog box displays.
FIGURE 52
Add Role dialog box
For step-by-step instructions, refer to
privileges from a role"
on page 152.
The new role displays in the Roles list of the Users dialog box. To add users to this role, follow
the instructions in
"Exporting a user account"
Click Close to close the Users dialog box
The Users dialog box displays.
The Edit Role dialog box displays.
step 3
through
step 5
"Adding privileges to a role"
on page 146.
in
"Creating a new role"
on page 149.
Brocade Network Advisor SAN User Manual
on page 151 or
"Removing
53-1003154-01