San Fabric Monitoring - Brocade Communications Systems WFT-2D User Manual

SAN Fabric monitoring

NOTE
Monitoring is not supported on Hosts. The upper limit to the number of HBA and CNA ports that can
be monitored at the same time is 32. The same upper limit applies if switch ports and HBA ports are
combined. You can select switch ports and adapter ports from a maximum of ten devices.
Fabric monitoring enables discovery of and data collection for the specified fabric and all
associated devices. The Management application enables you to view fabric monitoring status
through the Discover Fabrics dialog box. The following table illustrates and describes the icons that
indicate the current status of the discovered switches.
TABLE 11
Icon
For Professional and Professional Plus, the default monitoring interval is 120 seconds (minimum
interval is 120 seconds).
Table 6 details the default and minimum monitoring intervals used to query the monitored
switches:
TABLE 12
SAN Size
Small
Medium
Large
To change the monitoring interval, refer to
Brocade Network Advisor SAN User Manual
53-1003154-01
Monitor Icons
Description
Displays when the switch is managed and the switch management status is okay.
Displays when the switch is managed and the switch management status is not okay.
Displays when the fabric or switch is not managed or not monitored.
Monitor Intervals
Default
120 seconds (2 minutes)
900 seconds (15 minutes)
1800 seconds (30 minutes)

SAN Fabric monitoring

Minimum
60 seconds (1 minute)
120 seconds (2 minutes)
180 seconds (3 minutes)
"Configuring asset polling"
3
on page 122.
49