Server And Client Ports - Brocade Communications Systems WFT-2D User Manual

FIGURE 7
2. Review the port status details:
3. Click Close.

Server and client ports

In some cases, a network may utilize virtual private network (VPN) or firewall technology, which can
prohibit communication between Products and the Servers or Clients. In other words, a Server or
Client can find a Product, appear to log in, but is immediately logged out because the Product
cannot reach the Server or Client. To resolve this issue, check to determine if the ports in the table
below need to be opened up in the firewall.
NOTE
Professional edition does not support remote clients.
Table 3
and includes the following information:
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1003154-01
Port Status dialog box
•
Name — The Port name. Options include CIM Indication for Event Handling, CIM Indication
for HCM Proxy, FTP, SCP/SFTP, SNMP Trap, Syslog, Web Server (HTTP), and Web Server
(HTTPS).
•
Port # — The required port number.
•
Status — The status of the port. The status options are as follows:
Success — The port is listening or bound to the server.

Failed — The port fails to listen or bind to the server. It is occuppied by another

process.
Paritally Failed — The port is used by the server as well as other applications.

Disabled (external FTP port only) — This is considered a normal status.

•
Running Process – The name of the process using the port (not the Management
applciation). Blank when the port is only used by the Management applciation server. If
multiple processes occupy the same port, the process names display in a
comma-separated list.
•
Recommended Actions — Suggested action to take to resolve the issues.
lists the default port numbers and whether or not it needs to be opened up in the firewall
Port Number — The port at the destination end of the communication path.
Ports — The name of the port.
Transport — The transport type (TCP or UDP).
Description — A brief description of the port.
Management server and client
1
13