Disabling San Ethernet Loss Events; Event Storage Settings; Configuring Event Storage - Brocade Communications Systems WFT-2D User Manual

4

Event storage settings

Disabling SAN Ethernet loss events

To disable Ethernet loss events, complete the following steps.
1. Select Server > Options.
2. Select SAN Ethernet Loss Events in the Category list.
3. Clear the Enable events for ethernet loss check box.
4. Click Apply or OK to save your work.
Event storage settings
You can configure the maximum number of historical events save to the repository, how long the
events will be retained, as well as whether to store historical events to a file before purging them
from the repository.

Configuring event storage

To configure event storage, complete the following steps.
1. Select Server > Options.
2. Select Event Storage in the Category list
3. Enter the maximum number of events you want to be retained in the repository in the
90
The Options dialog box displays.
The Options dialog box displays.
FIGURE 27
Options dialog box (Event Storage pane)
Maximum Events field.
Depending on your installation, the maximum number of events stored are as follows:
•
Professional — 1 through 100,000
•
Professional Plus — 1 through 1,000,000
•
Enterprise — 1 through 10,000,000
Default is 50,000. Older events are purged at midnight on the date the maximum event limit is
reached regardless of the retention days.
(Figure 27).
Brocade Network Advisor SAN User Manual
53-1003154-01