Launching A Remote Client - Brocade Communications Systems WFT-2D User Manual

San user manual
Table of Contents

Advertisement

1
Management server and client
5. Click OK on the Login Banner dialog box.

Launching a remote client

NOTE
For higher performance, use a 64-bit JRE.
To launch a remote client, complete the following steps.
1. Open a web browser and enter the IP address of the Management application server in the
2. Click Desktop Client.
3. Click the Web Start the Client link.
4. Log into another server by entering the IP address to the other server in the Network Address
5. Remove a server from the Network Address list by selected the IP address and clicking Delete.
6. Choose one of the following options:
4
The Management application displays.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.
Address bar.
If the web server port number does not use the default (443 if is SSL Enabled; otherwise, the
default is 80), you must enter the web server port number in addition to the IP address. For
example, IP_Address:Port_Number.
The web client login page displays.
The Management application web start page displays.
The Log In dialog box displays.
field.
NOTE
The server must be the exact same version, edition, starting port number, and network size as
the client.
If you configured authentication to CAC, enter your PIN in the CAC PIN field.
If you configured authentication to the local database, an external server (RADIUS, LDAP,
or TACACS+), or a switch, complete the following steps.
a. Enter your user name and password.
The defaults are Administrator and password, respectively.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
b. Select or clear the Save password check box to choose whether you want the
application to remember your password the next time you log in.
To change your password, refer to
"Changing your password"
Brocade Network Advisor SAN User Manual
on page 161.
53-1003154-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents