Brocade Communications Systems WFT-2D User Manual page 1594

H
Database tables and fields
TABLE 76
Field
DECRYPT_EXISTING_DATA
KEY_ID
CRYPTO_HOST_ID
LUN_NUMBER
BLOCK_SIZE
TOTAL_BLOCKS
LUN_STATE
LUN_FLAGS
ENCRYPTION_ALGORITHM
KEY_ID_STATE
REKEY_SESSION_NUMBE
R
PERCENTAGE_COMPLETE
REKEY_ROLE
CURRENT_LBA
LUN_STATE_STRING
NEW_LUN
1542
CRYPTO_LUN (Continued)
Definition
Not used. When configuring disk LUN that was
previously encrypted and is to become cleartext, this
property tells the switch whether or not to start a
re-keying operation to decrypt the existing LUN data.
This property does not need to be persisted. This
feature is no longer supported in FOS.
Hex-encoded binary key vault ID for the current data
encryption key for this LUN.
This ID may be used to locate the data encryption key
in the key vault.
Foreign key reference to the CRYPTO_HOST that uses
this LUN.
The Logical Unit Number of the LUN, as seen by the
LUNs host. This may be an
integer (0 - 65565) or a WWN-format 8-byte hex
number.
The LUN''s Logical Block Size, in bytes. Only valid for
disk LUNs.
The total number of logical blocks in the LUN.
Multiplying BLOCK_SIZE by TOTAL_BLOCKS gives the
LUN size in bytes.
LUN operational status, such as OK or disabled for
various reasons. For possible values see the enum
definition in CryptoClientConstants. The default value
is 0.
Bitmap of LUN options. The only option currently used
is bit 0 (least significant) which indicates that the LUN
must be manually enabled because it has been
disabled due to inconsistent metadata detected. The
default value is 0.
Stores the Encryption Algorithm used to
encrypt/decrypt data on the LUN
State of the Key ID retrieval from Key Vault. The default
value is 0.
Unique Rekey session number. The default value is 0.
Percentage of rekey completion. The default value is 0. int
Rekey Role definition. The default value is 0.
Current Logical Block address for the rekey session in
progress. The default value is 0.
Lun state string.
This field specifies that when a LUN is added to its
container, indicate that it''s a new LUN to be used in
SRDF Configuration. Feature available only from 6.4
release onwards and for RSA key vaults. CryptoLun
collector and CryptoLunBean fills in this value. The
default value is -1.
Format
smallint
varchar
int
varchar
int
int
int
bigint
varchar
smallint
int
smallint
int
varchar
smallint
Brocade Network Advisor SAN User Manual
53-1003154-01
Size
64
64
512
2048