Konica Minolta bizhub 362 Service Manual page 816

Field Service Ver. 1.0 Dec. 2008
[10]
[11]
[9]
[10]
[12]
[15]
[14]
[19] [17]
[20] [22] [21]
[13]
A0PGF2C513DA
[14]
[16]
[15]
A0PGF2C514DA
[18] [17]
A0PGF2C515DA
10. Remove the screw [9], and then
remove the Mounting Bracket [11]
and the Lock Release Lever [10].
NOTE
• Be careful that when the Mounting
Bracket [11] is removed, the spring
[12] is also removed.
• When installing the spring, install
the end of spring [12] into the gap
[13] between the ribs.
11. Remove four screws [14] and four
screws [15], and remove the Lower
Cover [16].
12. Remove four screws [17], and
remove the plate [18] and [19].
13. Unplug the connector [20] and
remove the screw [21], and then
remove the Paper Guide Gear Assy
[22].
4. Other
15