Konica Minolta bizhub 362 Service Manual page 182

Field Service Ver. 1.0 Dec. 2008
(2) No Matching Paper in Tray Setting
• To set whether or not to automatically switch from a specified input tray to another tray
Functions
during PC printing.
• To prevent automatic switching of an input tray from a specified one to another during
Use
PC printing.
• The default setting is "Tray Priority".
Setting/
Tray Priority: Automatically to switch from a specified input tray to another tray during
Procedure
Tray Fixed:
C. Software SW
Functions • To set the status of each function according to the use using the software switch.
Use • To change the status of each function using the software switch.
1. Call Admin. 2 to the screen and touch [Software SW].
2. Touch [Mode Selection] and enter the mode number (a 3-digit numeral) using the 10-
Key Pad.
Setting/ 3. Touch [Bit Selection].
Procedure 4. Align the cursor using [←] or [→] key and define the bit with 0 or 1 of the 10-Key Pad.
(To define the value in hexadecimal, touch [HEX Selection] and enter the value using
the 10-Key Pad and A to F keys.)
5. Touch the [Enter].
D. Ping
Functions • To execute Ping.
Use • To check the TCP/IP network for condition.
Setting/ 1. Touch the [Ping].
Procedure 2. Select the address key to be executed and press the Start key.
"Tray Priority"
PC printing
Not to switch from a specified input tray to another tray during PC printing
The job is deleted if the setting paper is not match the specified input tray.
8. Utility/Counter Mode
Tray Fixed
143