Konica Minolta bizhub 362 Service Manual page 183

8. Utility/Counter Mode
E. Security Setting
NOTE
Confirm items shown below before setting enhance security system. If any following
items are not set, security setting menu is not shown.
• Make sure the numbers of administrator code are not all the same.
• Make sure the numbers of service code are not all the same.
• If HDD is mounted, make sure HDD lock password or Encryption Setting is set.
• Make sure CS Remote Care is not set.
• Make sure SSL certification is made with PSWC.
To mount the optional HDD when enhance security mode is set ON, turn OFF the
enhance security mode first.
(1) Enhance Security
Functions • To set weather or not to enhance security system.
• If enhance security is set [ON], the following items are assured.
• Password regulation is applied.
• Unauthorized access penalty system becomes available, and if wrong password is
entered three times continuously at operations that require password authentication,
password entering will be rejected.
• Setting of Software DIPSW cannot be changed.
• [User List] is not shown among the keys displayed on user authentication.
Use • Print without authentication cannot be used.
• Auto reset cannot be set [OFF].
If auto reset is set [OFF] before adopting enhance security, the time is changed to [1
min.].
• Restrict One Touch Editing become available.
• HDD Temporary Overwrite Data become available.
• Some menus of Tech. Rep. Mode are not shown.
• Setting of network MIB cannot be changed.
1. Press [Enhance Security].
Setting/
2. Select ON and press [Enter].
Procedure
3. Turn OFF/ON the main power.
(2) Unlock
Functions • To unlock the password entering after wrong password is entered (three times).
Use • To unlock the password entering after wrong password is entered (three times).
1. Press [Unlock].
Setting/
2. Select the menu to be unlocked and press [Enter].
Procedure
3. Turn OFF/ON the main power.
(3) SSL/TLS
• To set whether or not to use SSL/TLS for HTML communications.
Functions
* If enhance security mode is set ON, menu is not shown.
Use • To use SSL/TLS for communications.
• The default setting is "OFF".
Setting/
Procedure
144
ON "OFF"
Field Service Ver. 1.0 Dec. 2008