Field Service Ver. 1.0 Dec. 2008
10.4.5
Hard Disk
• To set whether or not the HDD is mounted.
Functions
* To mount HDD when enhance security mode is set ON, turn OFF the enhance security
mode first.
• To change the presence of HDD
• [Yes] is automatically set when Hard Disk Format is executed.
Use
NOTE
• When mounting or removing HDD with Vender 2 being selected at Meter Counter
Mode, Clear FAX Setting needs to be conducted.
• The default setting is "No".
Setting/
Procedure
* Turn OFF/ON the main power after setting is changed.
10.4.6
Original Size Detecting Option
Functions
• To set whether or not the optional Original Size Sensors are mounted.
Use
• Select [Yes] when the optional Original Size Sensors are mounted.
• The default setting is "No".
Setting/
Procedure
10.5 Settings in the Administrator # Initialize
• To initialize the administrator number.
Functions
* If enhance security mode is set ON, menu is not shown.
Use
• To initialize the administrator number (12345678).
1. Call the Tech. Rep. Mode to the screen.
Setting/
2. Touch the [Administrator # Initialize].
Procedure
3. Select [Yes] and touch [Enter].
10.6 Settings in the Counter
10.6.1
Checking the counter reading
1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch [Check] and the specific counter key whose reading is to be checked.
10.6.2
Clearing readings of all counters at once
1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch the [Counter Reset].
4. Touch the counter keys to be cleared and then touch [OK].
Yes
"No"
Yes
"No"
10. Tech. Rep. Mode
167