Misfeed At Paper Exit Section - Konica Minolta bizhub 362 Service Manual

8. Jam Display
8.3.5

Misfeed at Paper Exit section

A. Detection timing
Type
Detection of misfeed at
Paper Exit section
Detection of paper left in
Paper Exit section
B. Action
Transport Motor (M2-ADF)
Original Detection Sensor (PC8-ADF)
Exit/Turnover Sensor (PC10-ADF)
Step
1 Initial check items
2 PC8-ADF I/O check
3 PC10-ADF I/O check
4 M2-ADF operation check
5 Change PBA-CONT
30
The Exit/Turnover Sensor (PC10-ADF) is not blocked even after the set
period of time has elapsed after the Original Detection Sensor (PC8-ADF)
is blocked by the paper.
The Exit/Turnover Sensor (PC10-ADF) is not unblocked even after the set
period of time has elapsed after the Original Detection Sensor (PC8-ADF)
is unblocked by the paper.
Relevant Electrical Parts
Action
PBA-CONT CN8CONT-3 to 6
Field Service Ver. 1.0 Dec. 2008
Description
Main Control Board (PBA-CONT)
WIRING DIAGRAM
Control Signal
-
PBA-CONT CN6CONT-6
PBA-CONT CN6CONT-9
-
Location
(Electrical Component)
-
DF-620 G-3
DF-620 G-4
DF-620 C-6
-