List Of Soft Switches - Konica Minolta bizhub 362 Service Manual

11. Soft Switch Settings

11.3 List of Soft Switches

NOTE
• If no bit settings are given in the soft switch list that follows, the factory settings
for those particular bits are fixed and should never be changed.
: Default settings of U.S.
: Default settings of Europe
: Default settings are common
MODE
Bit:
000
Bit Feature
7 Specifies whether TX
markers are return to ON
or OFF after completing
operations. <*>
6 Select position of TX
markers. <*>
5 Specifies whether print-
ing TSI on transmitted
document is returned to
ON or OFF after complet-
ing operations. *
4 Select position of TSI. *
3 Specifies whether con-
firming communication
password at TX is
returned to ON or OFF
after completing opera-
tions. <*>
2 Confirm communication
password at RX. <*>
1 Specifies which TX
method is returned to ON,
memory-stored TX or
nonstorage TX, after com-
pleting operations. *
NOTE
• The features with (*) are settable by users. *: Screen setting <*>: Soft switch setting
50
Factory setting bit
7 6 5 4 3 2 1 0
0 0 1 1 0 0 0 0
Logic
0 1
OFF Yes
Top & bottom of
bottom doc.
of doc.
No Yes
Outside Outside
doc. doc.
No Yes
No Yes
Memory- Non-
stored stored
Field Service Ver. 1.0 Dec. 2008
HEX:30
Description
Memory-stored TX
includes quick
memory TX.