Konica Minolta bizhub 362 Service Manual page 818

Field Service Ver. 1.0 Dec. 2008
[34]
Precaution for In & Out Guide Drive Motor Reinstallation
1. Press the two In & Out Guides [1] in and check that they touch the stopper [2] simulta-
neously.
2. Check that pins [4] can be inserted through the positioning holes [3] (3 holes) of the In
& Out Guide Sensor Assy.
3. Use two screws to secure the In & Out Guide Drive Motor.
[33]
A0PGF2C518DA
[2]
18. Remove two screws [33], and
remove the In & Out Guide Drive
Motor [34].
[1]
[4]
4. Other
[3]
4511F2C533DA
17