Periodical Check; Maintenance Procedure (Periodical Check Parts); Replacing The Separation Roller Assy - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008
MAINTENANCE
2.

Periodical check

2.1

Maintenance procedure (Periodical check parts)

2.1.1

Replacing the Separation Roller Assy

[1]
[3]
[4]
[7]
NOTE
• Install the Separation Roller Assy while pressing the holder down so that it aligns
to the metal bracket of the machine.
• Make sure that the Separation Roller Assy is not tilted to the right or left when
installed.
NOTE
• Replace the Separation Roller Assy, Paper Take-up Roller and Pick-up Roller at the
same time.
1. Remove the Right Door.
[2]
2. Remove two screws [1] and remove
[1]
4348fs2509c0
3. Remove two C-rings [3] and the
[5]
NOTE
• Be careful not to lose spring at this
[3]
time.
4061F2C507DA
4. Remove the C-ring [6], the Guide [7],
[8]
[6]
4061F2C508DA
2. Periodical check
See P.10
the Paper Separation Roller Mount-
ing Bracket Assy [2].
shaft [4], and remove the Paper Sep-
aration Roller Fixing Bracket Assy
[5].
and remove the Separation Roller
Assy [8].
4348fs2623c0
3