Konica Minolta bizhub 362 Service Manual page 820

Field Service Ver. 1.0 Dec. 2008
[10]
[16]
[13]
[15]
[12]
[9]
A0PGF2C521DA
[14]
[17]
[18]
[11]
A0PGF2C522DA
5. Remove two screws [9], and remove
the Folding Blade Assy [10].
NOTE
• Install the Folding Blade Assy in the
direction shown in the left figure.
[11] Front
[12] Rear
• Be sure to rotate the Crank Arm [13]
one turn in counter clockwise [15] (
as seen from the front of device )
from the position that the spring
[14] doesn't work (the spring hangs
down vertical), and then install the
Folding Blade Assy in the position
that the spring can hook the Stop-
per [16].
• Be sure to install the edge [17] of
Blade Support comes outside of the
metal plate [18].
4. Other
19