Connecting With The Ds Camera Head Switcher (Ds-Sw: Camera Switch Box, Optional) - Nikon ECLIPSE MA200 Instructions Manual

3.25.5

Connecting with the DS camera head switcher (DS-SW: Camera switch BOX, optional)

If the DS-L2 is connected with the DS camera head switcher, two camera heads can be connected to the
DS-L2.
If the DS-L2 is connected with the DS-SW, the register tab appears on the DS-L2 microscope info menu. On
the register tab, the "Measurement interlock for the magnification value of the microscope" function can be set
to ON/OFF for each camera head.
Figure 3.25-3 Registering the measurement interlock
For capturing the image and setting the camera, refer to the instruction manual supplied with the DS-L2.
Chapter 3 Operation Details
[REG.] tab
Sets if the optical
magnification value of
MA200 corresponds to
the port 1 on the camera.
Sets if the optical
magnification value of
MA200 corresponds to
the port 2 on the camera.
If you check the checkbox, the measurement
corresponds to the optical magnification of
the microscope for the displayed image
captured by the camera connected to the
selected camera port of the DS-SW.
67