Control/Communication Devices And Relay Devices; P2-Ctlb Control Box - Nikon SMZ25 Instruction Manual

11

Control/Communication Devices and Relay Devices

P2-CTLB Control Box

11.1
When electrically connected to the following devices, the P2-CTLB Control Box can detect the device states and handle
communications:
No.
(1) SMZ18 Zooming Body
(2) P2-DBL LED Diascopic Illumination Base,
P-DSL32 LED Diascopic Illumination Stand
(3) P2-RLY Relay Box
(4) P2-EFLI Epi Fluorescence Attachment
(5) P2-RNI2 Intelligent Nosepiece
(6) C-HGFIE HG Precentered Fiber Illuminator
(7) C-HGFIE HG Precentered Fiber Illuminator
(8-1) DS-L4 camera control unit plus DS camera
(8-2) Personal computer plus DS camera
(9) AC adapter
• The power supply for control provides power for the board in the control box and devices (1) to (5).
• Devices (1), (4), and (5) are connected through device (3).
• One type-B USB connector is equipped so that device (8-1) or (8-2) can be connected. Note that both devices cannot be
connected at the same time.
• To operate using a personal computer after connecting device (8-1), connect the USB cable from the personal computer
to device (8-1).
• Communications with device (7) are handled through a RS232C connection. Communications with device (8-1) or (8-2)
are handled through a USB connection.
Chapter 8
Functions and Operations of the Devices
P2-CTLB Control Box
Device
Power LED
Power switch
Detects the magnification.
Turns On/Off LED illumination, controls illumination, and monitors the
light intensity.
Relays communications.
Detects the turret address on the optical path.
Detects the nosepiece address on the optical path.
Switches the ND filter and opens/closes the shutter.
Communications
Communications
Communications
24 V power input
127
Operation