Nikon ECLIPSE MA200 Instructions Manual page 14

Supporting Pillar for Dia-Illuminator
100W/Supporting Arm for DS-L2
attaching part
(Refer to 3.23 and 3.24.)
Attach the supporting pillar for
dia-Illuminator 100W or the supporting
arm for DS-L2.
Tool storage
Stores the supplied hexagonal
wrench and two hexagonal
screwdrivers.
Rear-panel clamp screw
Rear-panel
Remove the rear-panel
cover for cable connection
of the revolving nosepiece.
Air vents
Cable keeper
Keeps cables inside.
"CAUTION for heat"
symbol
Epi illumination
lamphouse
(LV-LH50PC Lamphouse)
Attach an HG precentered
fiber illuminator instead of
LV-LH 50PC Lamphouse,
if necessary.
Signal cable hole for the
nosepiece controller 2
Connectors
(Refer to Figure 1.1-4.)
AC inlet
Connects the power cord exclusive
for the region of the product used
(optional).
Power switch
(Refer to 3.1.)
Set the switch to the "|" side to turn
on the power, or to the " " side to
turn off the power.
When the power is turned on, the
POWER LED on the front-display
lights up.
Chapter 1 Part Name and Function
Optical path changeover
lever (eyepiece tube/back
port)
(Refer to 3.4.)
Press: Eyepiece tube/back
port =100/0
Pull: Eyepiece tube/back port
=55/45
Attaching part for the
intermediate magnification
unit
(Refer to 3.21.)
Attach this unit to change
observation magnifications.
Back port
Lamp air
vents
Filter turret
(Refer to 3.10.)
Switch the turret when the ND
filter or other filters is/are turned.
Figure 1.1-3 Left view, Rear view
12
Eyepiece tube clamp screw
Optical path changeover lever
(vertical tube/binocular tube)
(Refer to 3.4.)
Press: Binocular/vertical tube=100/0
Pull: Binocular/vertical tube=0/100
Coarse torque
adjustment ring
(Refer to 3.7.)
Adjusts the rotation
residence.
Binocular
Vertical
tube
tube
Clamp
screws for
the filter
turret
Brightness control
dial
(Refer to 3.2.)
Adjusts the brightness
of the lamp.
Fine focus knob
(Refer to 3.7.)
Focus on the sample by
slightly lifting/lowering the
revolving nosepiece with
the fine knob.
Coarse focus knob
(Refer to 3.7.)
Focus on the sample roughly
lifting/lowering the revolving
nosepiece with the coarse
knob.