3.2
Illumination
3.2.1
Brightness control and illumination ON/OFF
Brightness range
OFF
position
Brightness control dial
Figure 3.2-1 Brightness control and illumination
ON/OFF
3.2.2
Switching the Internal/External brightness control
Internal/external brightness control
changeover switch
OFF: adjusts the brightness on the
microscope
Figure 3.2-2 Switching the Internal/External
brightness control
Chapter 3 Operation Details
Adjust the brightness of the lamp for the lamphouse
(LV-LH50PC) with the brightness control dial on the
left of the microscope. With the power switch
remained on, turn the dial clockwise to increase the
brightness or turn the dial counter-clockwise to
decrease it. Turn the dial to OFF to turn off the lamp.
Index
To adjust the lamp for the lamphouse (LV-LH50PC)
with the brightness control dial, be sure to set the
Internal/External brightness control changeover
switch [EXTERNAL ON/OFF] to OFF (internal mode)
on the rear. To adjust the brightness of the
lamphouse on the PC, set the changeover switch to
ON (external mode).
30