Changing The Observation Position - Nikon ECLIPSE MA200 Instructions Manual

3.8.2

Changing the Observation Position

Figure 3.8-2 Changing the observation position
Chapter 3 Operation Details
The rectangular stage is equipped with the knob to
move the stage in all four directions.
The upper knob is used for Y direction (back and
forth), and the lower knob for X direction (left and
right).
The stage knob has a universal joint that allows you
to move the stage knob direction being tilted at 28
degrees. This offers easy operation and user
convenience for switching between the focus knob
and the stage knob.
The stage is equipped with the graduations that move
50 mm (max.) to X or Y direction.
• A cross roller guide is provided to move the
stage in the X/Y direction. The Y direction
movement rack is located at the bottom of the
stage. Do not touch the rack during your
operation, as you may get injured.
• If you move the stage plate directly by hands,
the stage will be damaged. Make sure to use
these stage knobs to move the stage.
38