Nikon ECLIPSE MA200 Instructions Manual page 77

Table 4.3-1 User control options for the unit using the PC/DS-L2
Unit
EXTERNAL:
ON (external
mode)
LV-LH50 PC
EXTERNAL:
Lamphouse
OFF
(internal
mode)
C-HGFI HG Precentered
Fiber Illuminator
C-HGFIE HG Precentered
Fiber Illuminator
MA2-DP supporting pillar
for dia-Illuminator 100W
LV-NU5A motorized
nosepiece
MA2-NUI5 revolving
nosepiece
D-ND6 revolving nosepiece
D-NI7 revolving nosepiece
MA2-MC intermediate
magnification unit
Registering information on
the objective
1: Shutter open/close or ND select can be controlled using the remote controller (C-HGFIE-C HG controller) exclusive for the C-HGFIE.
2: The shutter open/close or ND select can be controlled if the remote controller (C-HGFIE-C HG controller) exclusive for the C-HGFIE
is used.
3: The rotation of the revolving nosepiece can be controlled on the Motorized Nosepiece Controller 2.
Chapter 4 Assembly
PC
Control Status
Lamp lit/unlit, Lamp lit/unlit,
lamp brightness lamp brightness
adjustment adjustment
Lamp lit/unlit,
/ lamp brightness
adjustment
/ /
Changing the
shutter Shutter
open/close, ND open/close, ND
(Neutral (Neutral
Density) Density)
1
/ /
Rotation of the
Address for the
revolving
revolving
nosepiece
nosepiece
3
Address for the
/ revolving
nosepiece
Address for the
/ revolving
nosepiece
Address for the
/ revolving
nosepiece
Magnification of
/
the MA2-MC
Objective info Objective info
DS-L2
Control Status
Lamp lit/unlit,
/ lamp brightness
adjustment
Lamp lit/unlit,
/ lamp brightness
adjustment
/ /
Shutter
/ open/close, ND
2 (Neutral
Density)
/ /
Rotation of the
Address for the
revolving
revolving
nosepiece
nosepiece
3
Address for the
/ revolving
nosepiece
Address for the
/ revolving
nosepiece
Address for the
/ revolving
nosepiece
Magnification of
/
the MA2-MC
/ Objective info
75
Brightness
Notes
control dial
/ ---
Lamp lit/unlit,
lamp brightness ---
adjustment
Do not use the C-HGFI when
/ the LV-NU5A motorized
nosepiece is mounted.
To connect the C-HGFIE with
the MA200 main body, use
the RS232C cross cable.
When attaching the C-HGFIE
to the microscope with the
LV-NU5A motorized
nosepiece mounted, RS232C
cross cable must be used for
/
their connection to control the
shutter according to the
rotation of the motorized
nosepiece. If you fail to make
this connection, a fire of light
may enter in the view-field at
the rotation of the motorized
nosepiece.
To use the MA2-DP for the
diascopic illumination, set the
/
brightness control dial to OFF.
Connect the Motorized
Nosepiece Controller 2 with
the MA200 main body using
the RS232C cross cable.
---
---
---
---
Refer to "4.3.3 Registering
information on the objective."