Attach The Eyelevel Riser (Optional); Attach A Camera And Connect The Ds Camera Control Unit (Optional); Quadrocular Tube - Nikon Eclipse Ni-E Instruction Manual

22

Attach the eyelevel riser (optional).

Tool: Hex driver (2 mm across flats)
Place the eyelevel riser on the arm and tighten the fixing
screw on the front of the arm using a hex driver (2 mm
across flats).
23
Attach a camera and connect the DS camera
control unit (optional).
Attaching a camera to the DSC zooming port for quadrocular tube.
23.1
(1) Screw the camera head to the C mount of the DSC
port. Align and fit the positioning pin of the DS
camera with the positioning groove on the C mount
on the left of the zooming port, and tighten the two
camera fixing screws.
(2) Connect the camera connector for the camera head
and the camera connector for the DS-L3/DS-U3 DS
camera control unit using a provided camera cable.
(3) Connect the EXT.I/O connector for DS-L3/U3 with
the DSC1 connector for the microscope or the DSC2
connector for the connector box using a camera
trigger cable.
For DS-L3, the USB cable can also be used for
connecting the USB (H) connector for DS-L3 and
the USB connector for the microscope.
Precautions for connecting the camera
trigger cable
When connecting the camera trigger cable with the
DSC connector, be sure to insert it completely.
Prior to photomicrography, adjust the focus on the
monitor as appropriate. (See Chapter 3 "22
Capturing Images – Photomicroscopy" in the
"Operation" instruction manual.)
Chapter 1
Assembly
Eyelevel riser fixing screw
Attaching a camera to the DSC zooming port for
32
Eyelevel riser
Fixing the eyelevel riser
Camera cable connector
Camera head

quadrocular tube

C mount