Intermediate Magnification Unit - Nikon ECLIPSE MA200 Instructions Manual

4.14

Intermediate Magnification Unit

Cable
Opening for the intermediate magnification unit
Chapter 4 Assembly
Cable keeper
1 Remove four bolts to take out the cover on the
attaching part for intermediate magnification unit
with the supplied hexagonal screwdriver.
2 The cables are secured by the cable keeper inside
the opening as the figure shows. Remove the
cable from the cable keeper, then connect the
cable to the connector on the intermediate
magnification unit.
* The cable keeper is attached to MA200 with a
double-side tape. Be sure to remove the keeper
before attaching the intermediate magnification
unit.
3 Insert the intermediate magnification unit to the
opening (with the MAGNIFICATION indications
up) to the limit, then screw the four bolts back into
the microscope securely.
86