Nikon ECLIPSE MA200 Instructions Manual page 15

Lamphouse connector
[LAMP DC12V50W]
Connects the cord on the epi
illumination lamphouse (12V
50W Precentered Lamphouse).
RS232C connector [HGFIE]
Connects the C-HGFIE HG
Precentered Fiber Illuminator.
RS232C connector [NCNT]
Connects the LV-NCNT2
control unit for the motorized
nosepiece.
About product parts names in this manual
The right column of the table below shows the product parts names described in this manual.
Package names
MA2-TI3 Trinocular Eyepiece Tube ESD (erect image)
MA2-NUI5 Intelligent Universal Quintuple
Nosepiece ESD
MA2-MC Magnification Module
Fl Filter Block MA2-FL G
(Other types than G are available.)
MA2-GR Grain Size Slider
MA2-PA Polarizing Filter Cube
MA2-UPA Polarizing Filter Cube with 1/4λPlate
MA2-SRSH 10 Specimen Holder
(Other types than SRSH 10 are available.)
Chapter 1 Part Name and Function
Figure 1.1-4 Connectors on the rear
Parts names in the ECLIPSE MA200 Instructions
MA2-TI3 Trinocular Eyepiece Tube
MA2-NUI5 Revolving Nosepiece
MA2-MC Intermediate Magnification Unit
General name: MA2-FL Fluorescent Unit
MA2-GR Grain Scale Slider
MA2-PA Polarizer/Analyzer Unit
MA2-UPA Polarizer/Analyzer Unit
General name: Sample Holder
13
Internal/External brightness
control changeover switch
[EXTERNAL ON/OFF]
(Refer to 3.2.2, 3.22.1, and
3.23.1.)
ON: Adjusts the brightness on
PC;
OFF: Adjusts the brightness on
the microscope.
USB connector [USB]
Connects a PC or the DS-L2.