Various Sliders Available For Attaching The Revolving Nosepiece; L-Dic/L-Dihc Slider (Single Nr Method) - Nikon ECLIPSE MA200 Instructions Manual

4.12 Various Sliders for Attaching the Revolving Nosepiece
To insert a slider, be sure to attach the objective in advance.
4.12.1

L-DIC/L-DIHC slider (single NR method)

For using the DIC slider in single NR method, attach the MA2-NUI5 revolving nosepiece or LV-NU5A
motorized nosepiece.
Sliding limit groove
Prism setting dial
Prism movement knob
Chapter 4 Assembly
1 Loosen the DIC slider limit screw on the
nosepiece using a hexagonal screwdriver.
2 Remove the slot from the revolving nosepiece to
insert the DIC slider.
3 Screw in the DIC slider limit screw.
When removing the DIC slider from the nosepiece,
fully loosen the DIC slider limit screw using a
hexagon screwdriver, and then pull out the slider.
Quintuple nosepiece
DIC slider limit screw
83