Nikon ECLIPSE MA200 Instructions Manual page 107

Power cord When used in 100-120 V region, outside Japan:
UL listed detachable power cord set, 3 conductor grounding
(3 conductor grounding Type SVT, No.18 AWG, 3 m long maximum, rated at 125 VAC minimum)
When used in 220-240 V region:
Detachable power cord set approved according to EU/EN standard, 3 conductor grounding
(3 conductor grounding Type H05VV-F, 3 m long maximum, rated at 250 VAC minimum)
When used inside Japan:
PSE approved detachable power cord set, 3 conductor grounding
(3 conductor grounding Type VCTF 3x0.75mm
Operation Temperature:
conditions
Humidity:
Altitude:
Pollution degree:
Installation category: Category II
Electric shock
protection class:
Indoor use only
Transport and Temperature:
storage conditions
Relative humidity:
Imaging system Scale:
Port:
Intermediate magnification:
•
This equipment has been tested and found to comply with the limits for a Class A digital device,
Applicable
pursuant to Part 15 of the FCC Rules.
standard
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
•
This Class A digital apparatus complies with Canadian ICES-003.
Cet appreil numérique de classe A est conforme à la norme NMB-003 du Canada.
•
The product complies with Australian EMI standard. (AS/NZS CISPR11 Group1 Class A)
•
CE marking
•
•
Chapter 7 Specifications
0°C to +40°C
85% RH maximum (with no condensation)
2000 m maximum
Degree 2
Class I
-20°C to +60°C
90% RH maximum (with no condensation)
Slider slot provided
Eyepiece tube/Back = 100/0
Eyepiece tube/Back = 55/45
Intermediate magnification unit (MA2-MC) attaching part provided
The product meets EU Low Voltage Directive requirements.
The product meets EU EMC Directive requirements. (EN61326)
2
, 3 m long maximum, rated at 125 VAC minimum)
105