3
Operation Details
3.1
Power ON/OFF
3.1.1
Power of the microscope
POWER LED lights up
Figure 3.1-1 Power of the microscope
■
Turning on the microscope during the use of an external light source
To use the HG precentered fiber illuminator or the supporting pillar for dia-Illuminator 100W provided as an
external light source, set the power switch on the external light source to ON in advance, then set the power
switch on the MA200 main body to ON. (See 3.22.1 and 3.23.1.)
3.1.2
Power supply of the lamp
The product has a built-in power supply circuit for the halogen lamp. When the specified lamphouse
(LV-LH50PC) is attached, the lamp is lit in connection with the power supply for the microscope.
Power switch
"|" side: ON
" " side: OFF
The power switch for the product is located beside
the AC inlet on the rear of the microscope. To turn on
the product, set the power switch to the "|" side. To
turn off the microscope, set the power switch to the
" " side.
The power LED on the front lights up when the power
is turned on.
29