Adjusting The Polarizer Direction - Nikon ECLIPSE MA200 Instructions Manual

Inverted metallurgical microscope
Table of Contents

Advertisement

Chapter 3 Operation Details
3.13.2

Adjusting the polarizer direction

Each time you turn the polarizer rotation ring, the
direction of the polarizer is changed. You can turn the
polarizer 360 degrees.
When the "+" mark on the polarizer rotation ring is
aligned with the " " mark, the crossed Nicol's
position is made. When the "=" mark on the rotation
ring is aligned with the " " mark, the open Nicol's
position is made.
(1)
Checking the crossed Nicol's position
Place the unit in the optical path. And then, place a
sample with a flat and plain surface onto the stage.
(1)
Set up the microscope for the simplified polarization
microscopy under the episcopic illumination.
(2)
Remove one eyepiece from the eyepiece tube and
Polarizer direction
look inside the open sleeve. You can see the
objective pupil as a bright circle.
Crossed Nicol's
Open Nicol's
position (1)
position (2)
Turn the polarizer rotation ring in either direction until
a dark cross appears in the view-field as shown in the
figure. This is the crossed Nicol's position.
Dark cross
Figure 3.13-3 Adjusting the polarizer direction
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents