Placing The Sample And Operating The Stage; Placing The Sample - Nikon ECLIPSE MA200 Instructions Manual

3.8

Placing the Sample and Operating the Stage

3.8.1

Placing the sample

Figure 3.8-1 Placing the sample
■
Sample holder
To use the sample holder, place it onto the stage.
The MA2-SR rectangular stage is supplied with the sample holder (outer diameter: φ108 mm, thickness: 2 mm,
teardrop-shaped aperture: φ22 mm). This sample holder is also supplied with the sample clip to hold the
sample set on the stage. Use the clip to prevent the sample from tipping over or being moved.
The sample holder is supplied with a rotation knob. If you turn the ring holding the rotation knob, you can turn
the sample with the observation position unmoved.
Various options are available for the sample holder as shown below. Select an appropriate option according
to the size or observation method of the sample used.
Item
Sample holder Standard Holder
(attached to stage)
MA-SRSH 25-40
Chapter 3 Operation Details
Sample holder
Sample
Sample clip
Model
Outer diameter φ108 mm; thickness: 2 mm; teardrop-shaped
aperture: φ22 mm; supplied with the rotation knob and a sample
clip
φ40 mm, supplied with the rotation knob and a sample clip
MA-SRSH 40
φ10 mm, supplied with the rotation knob and a sample clip
MA-SRSH 10
φ25×40 mm, supplied with the rotation knob and a sample clip
MA2-SRSH Holder set (φ23, 30, 36 mm) supplied with the rotation knob and
a sample clip
φ15 mm
MA-SRSH1
Normally, a sample can be placed on the stage with
the sample holder. It can be also placed directly on
the stage without the sample holder. In either case,
be sure that the observation position comes to the
center of the view-field.
Remarks
37