Objectives; Eyepiece Tube; Eyepieces - Nikon ECLIPSE MA200 Instructions Manual

4.7

Objectives

■
LU nosepiece adapter M32-25
To use the EPI objectives with small screw diameter while the quintuple revolving nosepiece is in use, screw
the LU nosepiece adapter M32-25 into the revolving nosepiece in advance.
4.8

Eyepiece Tube

4.9

Eyepieces

Chapter 4 Assembly
1 Remove the sample holder from the stage.
2 Screw the objectives into the socket of the
Fully loosen the eyepiece tube clamp screw on the
upper-left with the supplied hexagonal screwdriver.
Insert the dovetail on the eyepiece tube into the
circular groove on the attaching part to secure the
eyepiece tube with clamp screw.
Eyepiece tube
clamp screw
Attach eyepieces of the same magnification and the
same view-field number.
There are positioning protrusions on the binocular
part sleeve of the eyepiece tube. Align the notches of
the eyepiece with the protrusions on the sleeve and
slide the eyepiece into the eyepiece socket.
81
revolving nosepiece securely through the stage
hole.
Attach the objectives so that the magnification
increases when the revolving nosepieces are
turned clockwise as viewed from above.
Hold the eyepiece tube by hand when loosening
the clamp screw to prevent a sudden
disconnection and falling.