Using The Supporting Arm (Ma2-Mp) - Nikon ECLIPSE MA200 Instructions Manual

3.24

Using the Supporting Arm (MA2-MP)

The supporting arm is designed to mount Nikon camera control unit DS-L2.
The Supporting Arm for DS-L2 is equipped with a one-touch release. If you pull up the mount arm
attaching/detaching knob, the DS-L2 can be attached or removed from the supporting arm.
Mount arm
attaching/detaching knob
Mount arm
DS-L2 attached to the supporting arm
Figure 3.24-1 Supporting arm
Chapter 3 Operation Details
The rotation torque can be adjusted depending on the
tightness of the docking section of the mount arm to
Rotation
keep the DS-L2 steady, while achieving more
torque
comfortable operation for angle adjustment. Turn the
nuts (x2)
two nuts on the docking sections with the supplied
tool and control each rotation torque for the
horizontal/vertical direction.
Supporting
For using the DS-L2, refer to the instruction manual
arm
supplied with the DS-L2.
DS-L2
64