SMART Room System Setup And Maintenance Manual page 73

A P P E N D I X A
Using the interactive flat panel on-screen display menu
Option
On Time
Sleep Timer
OPTION
Language
ISM Method
Key Lock
Fail Over
Mode
DPM Select
DivX® VOD
Initial Setting
Set ID
Standby Mode
Proximity Control
Proximity Control
Re-enable Time
Auto Power Off
67 smarttech.com/kb/170450
Values Function
[N/A] Enables you to schedule times
when the interactive flat panel
turns on automatically
10–240 Specifies the amount of inactivity
(in minutes) before the interactive
Off
flat panel turns off, or disables the
sleep timer feature
[Languages] Sets the on-screen display menu's
language
Normal Sets the method for image
stickiness minimization (ISM)
Color Wash
On Enables or disables key lock
Off
Off Specifies the fail over mode
Auto
Manual
On Enables or disables DPM Select
Off
Registration Registers DivX video-on-demand
(VOD)
Deregistration
Yes Resets options in all menus to their
default values
No
1–255 Sets the interactive flat panel's ID
Standby Sets the Standby mode to reduce
power consumption
On Enables or disables presence
detection
Off
1–10 Sets how long the interactive flat
panel waits before detecting
motion again (in minutes)
15–240 Sets when the interactive flat panel
automatically turns off (in minutes)
Notes (if any)
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
ISM prevents static images that
appear in the same location for
long periods of time from causing
screen burn-in.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.