Replacing A Pen Nib; Using The Kickstands To Access Connectors - SMART Room System Setup And Maintenance Manual

C H A P T E R 5
Maintaining your room system
4. If the screen condensation doesn't evaporate, contact SMART Support
(smarttech.com/contactsupport).

Replacing a pen nib

To prevent damage to your interactive flat panels' anti-glare coating, replace a pen nib if it becomes
worn. Replacement pen nibs are included with your room system, and you can purchase additional
replacements from your authorized SMART reseller (smarttech.com/where) or the SMART Parts
Store (parts.smarttech.com).
To replace a pen nib
1. Grasp the worn nib on the pen with a pair of pliers, and then pull and twist the nib loose.
2. Press the replacement nib into the pen.

Using the kickstands to access connectors

For some maintenance and troubleshooting procedures, you might need to access the interactive flat
panels' connectors. You can use the kickstands to access these connectors.
To deploy the kickstands
1. Release the kickstand locks by pulling them down.
40 smarttech.com/kb/170450