SMART Room System Setup And Maintenance Manual page 19

C H A P T E R 3
Configuring your room system's software
2. Press the Input Select button
source is HDMI3/PC.
N O T E
In large room installations, set the input source to HDMI3/PC for both interactive flat panels.
The Lync appliance starts and completes the first-run installation process. During this process,
the Lync appliance restarts several times.
N O T E
This process takes time to complete. During this process, displays might not change content
or might appear blank for several minutes.
13 smarttech.com/kb/170450
on the interactive flat panel's front control panel until the input