Checking Your Room System Installation; Removing And Transporting Your Room System - SMART Room System Setup And Maintenance Manual

C H A P T E R 5
Maintaining your room system

Checking your room system installation

Inspect your room system's hardware installation frequently to ensure that it remains secure.
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions or other issues that could occur with the mounting
l
apparatus.
If you find an issue, refer to a professional installer.
Inspect your room system's software installation by making a test call (see Testing your room
system on page 53).

Removing and transporting your room system

W A R N I N G
Only professional, trained installers should remove your room system.
C A U T I O N
Save your original packaging so that you can repack your room system with as much of the
l
original packaging as possible. This packaging was designed with optimal shock and vibration
protection. If your original packaging isn't available, you can purchase the same packaging
directly from your authorized SMART reseller (smarttech.com/where).
Transporting your room system without correct packaging voids your warranty and could lead
l
to product damage.
43 smarttech.com/kb/170450