SMART Room System Setup And Maintenance Manual page 28

C H A P T E R 3
Configuring your room system's software
3. If adjusting the audio settings in the previous step didn't resolve your audio issues, do the
following:
a. Click System Settings, and then click Network Connections.
Control Panel appears.
b. Click Control Panel in the address bar.
c. Click Hardware and Sound, and then click Sound.
The Sound dialog box appears.
d. Click the Playback tab.
e. Right-click each playback device and select Test to determine which device is working.
f. Right-click the working playback device, and then select Set as Default Device.
g. Right-click all other playback devices, and then select Disable.
h. Click OK in the Sound dialog box, and then click OK in Control Panel.
4. Make another test call.
5. Click Apply & Restart.
The Lync appliance restarts in user mode.
N O T E
If the Lync appliance starts in administrator mode, click Apply & Restart again to shut down
and start the Lync appliance in user mode.
22 smarttech.com/kb/170450