SMART Room System Setup And Maintenance Manual page 74

A P P E N D I X A
Using the interactive flat panel on-screen display menu
Option
Welcome OSD
Welcome Timeout
Ready State Brightness 0–100
USB Setting
USB 1
USB 2
USB 3
Lync® Room Reset
CEC
FBC Control
68 smarttech.com/kb/170450
Values Function
Enabled Enables or disables the welcome
screen
Disable
5–30 Sets how long the welcome screen
appears (in seconds)
Sets the brightness of the welcome
screen
HDMI1 Sets the video input for the USB1
receptacle, or disables the
HDMI2
receptacle
HDMI3/PC
DVI-D
DPORT
VGA
Disable
HDMI1 Sets the video input for the USB2
receptacle, or disables the
HDMI2
receptacle
HDMI3/PC
DVI-D
DPORT
VGA
Disable
HDMI1 Sets the video input for the USB3
receptacle, or disables the
HDMI2
receptacle
HDMI3/PC
DVI-D
DPORT
VGA
Disable
Reset Resets options in all menus to their
default values (for
Cancel
SMART Room Systems)
Enabled Enables or disables Consumer
Electronics Control (CEC) support
Disable
on HDMI inputs
On Enables or disables the front
control panel
Off
Notes (if any)
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
Don't change this option from its
default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
You use this option when you first
configure the
SMART Room System (see
Turning on your room system for
the first time on page 12).
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
Don't change this option from its
default value.