SMART Room System Setup And Maintenance Manual page 67

A P P E N D I X A
Using the interactive flat panel on-screen display menu
Option
CEC
HEAT STATUS
FAN1
FAN2
SENSOR1
SENSOR2
FAN CONTROL
COOLING FAN
FAN SPEED
SENSOR1
SENSOR2
USB SETTING
USB1
61 smarttech.com/kb/170450
Values Function
ENABLE Enables or disables Consumer
Electronics Control (CEC) support
DISABLE
on HDMI inputs
[N/A] Shows the status of the first fan
[N/A] Shows the status of the second fan
[N/A] Shows the temperature reading
from the first sensor
[N/A] Shows the temperature reading
from the second sensor
ON Sets the fan to run continuously
(ON) or only when the sensor
AUTO
temperature is greater than
optimal sensor temperature
(AUTO)
LOW Sets the speed of the fan
HIGH
35–55 Sets the optimal temperatures for
the first sensor (in degrees
Celsius)
35–55 Sets the optimal temperatures for
the second sensor (in degrees
Celsius)
VGA1 Sets the video input for the USB1
receptacle, or disables the
VGA2
receptacle
DVI
HDMI1
HDMI2
HDMI3/PC
DISABLE
Notes (if any)
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.
This option only provides
information. You're unable to
modify it.
This option only provides
information. You're unable to
modify it.
This option only provides
information. You're unable to
modify it.
This option only provides
information. You're unable to
modify it.
This option isn't applicable to the
SMART Room System. Don't
change it from its default value.