Table of Contents
Advertisement
Press button
to get back to setting window of <
report.
Caution:
For cooperation with <
contain a query for report printout. All data are automatically sent to a computer
program, report may be printed by means of a computer.
If during the control course the number of negative T errors detected by the
software requires controlling another sample from the batch (as specified by the
regulation on CPG), then on completing the measuring process of sample 1 the
software displays a command to control another sample from the batch:
Press button
actualize. Upon completion of second sample control the program will generate
summary of the control. Report on performed control may be printed on a
printer connected to a balance.
Caution:
A template and an example of a report on product control is provided further
down this user manual.
27.9. Non-destructive empty – full control mode
For „Non-destructive empty – full" control the user pre-sets „batch" to be
measured. The "batch" is pre-set in a product data. The program accordingly to
the pre-set "batch" displays a message asking the user to weight empty
packagings first, next full in the same order:
to print report on a printer connected to the balance. Press
E2R System> summary process message shall not
for confirmation, the text and tolerable number of errors will
PGC> mode without printing the
- 150 -
Advertisement
Table of Contents
