Reports On Density - RADWAG 3Y Series User Manual

Report's name consists of date and time of its creation, e.g.:
•
2011.10.12 15:12:15
Caution:
It is possible to use an option for searching a report on formulation.
List of parameters in a report on formulation:
1. Start date
2. End date
3. Formulation
4. Sum
5. Target value
6. User
7. Client
8. Warehouse
9. Number of measurements
10. Status

29.7. Reports on density

Reports from density contain data on carried out density determination
processes of solids, liquids and air. Each report can be previewed, searched by
name, date, code or exported and printed.
Procedure
Enter submenu <
•
key
Press field of a desired report record, unless it is visible on the top of the
•
list, wind the list forward using navigating keys
Report's name consists of date and time of its creation, e.g.:
•
2011.12.12 11:12:15
Caution:
It is possible to use an option for searching a report on density.
List of parameters in a report on density:
1. Sample number, field with a value if in Density mode option: Request
sample number is set = YES
2. Start date
3. End date
4. Density
5. Volume
6. Procedure
7. User
8. Product
Databases>, and press <
[calculated density of a sample of solid, liquid or
air]
[calculated volume of tested sample, density
measurement of solid object]
[depending on selected procedure, data contained
in a report may change]
[name of a user carrying out the procedure]
[name of tested sample]
- 166 -
Reports from density>