Statistical Quality Control - Sqc - RADWAG 3Y Series User Manual

26. STATISTICAL QUALITY CONTROL – SQC
Working mode <
different types of product packing processes and aimed at monitoring and / or
controlling the packing process. It enables detecting excess or lack of product
quantity in a packaging.
if the samples are weighed, and the results are stored in the database ,then the software
enables carrying out a trend, and displaying them in a form of a chart.
The software provides the possibility of controlling a batch comprising up to 1000 samples.
Each completed control process is saved in the SQC database, and its results are ready for
previewing in an optional moment. Each series has a determined set of parameters that are
stored in the database: maximum, minimum, standard deviation and average value for
each batch, etc.
SQC control process can be carried out manually (by pressing <PRINT> button for each
measurement) or automatically (the measurements are saved automatically after
stability of indication for each measured sample).
The balances feature an implemented module for statistical control processes. It
is supported by a database containing list of products with error values <–T1>
and <+T1> declared for each product.
The control process is initiated automatically and completed on controlling a
required quantity of samples, which is determined by the user in the SQC mode
settings.
After completing the control process the balance enables generating a final
report containing all required data on the control. The report is printed on a
connected printer. Data on a control is also automatically saved in the Database
of SQC Reports.
Control cycle runs in accordance with the following schema:
Selecting a user,
•
Selecting a product,
•
Control start,
•
Acquiring weighing records,
•
Automatic finish of control process after weighing required quantity of
•
samples (a batch),
Printing a report on control process.
•
Statistical Quality Control > is intended to carrying out
- 131 -