Settings; Working Modes; Readout - RADWAG 3Y Series User Manual

14.2.1. Settings

14.2.2. Working modes

On entering this option, the display opens a window containing all accessible
working modes. The user can introduce their settings to each of the working
modes which are activated on selecting a specific profile.
In each of the working modes, the user can change the following parameters:
 Settings
contain specific parameters relating to a working mode and universal
settings, such as: result control, tare mode, automatic footer printout,
printout mode, printout.
 Functions of quick access keys
declaring quick access keys, which are visible in the bottom display bar
 Information
declaring information which is visible in the grey coloured workspace
 Printout
declaring type of printout of defining a non-standard printout

14.2.3. Readout

The function enables the user to adjust balance operation to ambient
conditions (filter settings) or individual user needs. Menu <Readout> contains
the following elements:
FILTER
Each measurement signal before being displayed is electronically
processed for the purpose of obtaining corrected parameters
specific for stable measurement result, i.e. ready to read.
Name
On entering this option, the display opens a message box
with keyboard. Insert name of a profile and accept it by
pressing key.
The name is assigned to the profile.
Default working mode
On entering this option the user can select a specific
working mode, which is set as default in a profile. In case
option <None> is selected, then on selecting the profile, the
balance activates last used working mode.
- 56 -