Manual Printout / Automatic Printout - RADWAG 3Y Series User Manual

User log out
Format: LOGOUT CR LF
Accessible responses:
LOGOUT OK CR LF
ES CR LF
Set balance mode
Format: PROFILE_Name CR LF where: _ - space (Name must be accordant
with the name form entered in a balance – lowercase and uppercase letters)
Accessible responses:
PROFILE OK CR LF
LOGIN ERRROR CR LF - command understood, an error in PROFILE name,
ES CR LF
Send all implemented commands
PC CR LF
Format:
Accessible responses:
PC_A_"Z,T,S,SI,SIA,SU,SUI,C1,C0,CU1,CU0,DH,ODH,UH,OUH,OT,UT,
LOGIN,LOGOUT,PC" – command carried out, terminal has sent all
implemented commands.

36.3. Manual printout / Automatic printout

Balance 3Y series enables generating manual or automatic printouts.
Manual printout: press
•
(measurement result),
Automatic printout is generated automatically, in accordance to the settings
•
of automatic printout (see point 10.8 of this user manual).
The content of a printout depends on setting in menu <Standard printout> -
<Weighing printout template>(see point 15.5 of this user manual).
- command understood, user is logged out
- command not recognized (error in format)
- command understood, new PROFILE activated
log in failed
- command not recognized (error in format)
key on stabilization of indication
- 208 -