Table of Contents
Advertisement
2.6.
Balance cleaning
Clean the balance using a damp cloth by gentle rubbing contaminated places.
Remember to remove the weighing pan and its shields from the weighing
chamber before their cleaning.
CAUTION:
Cleaning balance's weighing pan if installed may damage instrument's measuring
mechanism.
For ease of draft shield cleaning process it is allowed to remove its glass parts as it
has been presented below.
Before installing the balance in its intended place
of use, remove transport protections (1) and
assembly the weighing pan (2) (for APP 10.3Y, one
of the pans only).
On assembling the components, connect all
peripheral devices to the balance and then plug
the instrument to the mains. Power socket is
located at the back of balance's housing.
On removing the protections and assembling the
weighing pan, connect the terminal to the socket
located at the back of balance's housing, and
connect all peripheral devices. Only then plug the
balance to mains (mains socket is located at the
back of balance's housing).
- 14 -
Advertisement
Table of Contents
